HYDROFLEX 10/20 cord based on acrylic, it expands upon contact with water and provides waterproofing and sealing of working and "cold" joints, filling the abutments and the smallest voids in the concrete body, forming a reliable protective layer. It is available as standard with a rectangular cross section of 10 x 20 mm and a length of 10 m.

It is used for drinking water tanks, swimming pools, sewage treatment plants, in structural joints of buildings, wall joints with the foundation of the building, sealing of communication passages through the foundation walls, on PVC pipes of input and output as a water-repellent flange, used to seal areas exposed to seawater.

Advantages:

• Easy installation
• Universal application
• Swelling occurs in a controlled state. Does not damage concrete when it swells
• Resistant to salt water and various chemicals

Installation:

• The surface must be clean and dry
• Unwind the required amount of cord
• Apply glue in the middle of the seam and secure the cord to the surface
• It is necessary to connect the cord joint-to-joint without overlap

*Do not install on a wet, ice-covered or dirty surface. Also, installation cannot be carried out during the rain.

Limitations:

• After installation, the surface must be protected from moisture before pouring concrete
• Do not use for expansion joints
• Do not mount at elevated water levels

Packaging

HYDROFLEX 10/20 - 10 m/pack 

Shelf life:

12 months in the original, undamaged packaging. Store in a dry room at a temperature of 5 °C to 35 °C, protecting from direct sunlight.